BMW X6 — Matte PPF, Tint & Coating

About this build

This BMW X6 came through our Los Angeles studio as a performance daily-driver build — the finish call usually hangs on whether the owner wants the car to read factory-spec or visibly customized once it leaves our bay. Multi-service builds are sequenced deliberately — one finish has to fully cure before the next one goes on top, so the schedule reflects that order.

For this build, we combined matte paint protection film with window tint and an exterior coating to create a full functional upgrade rather than a single cosmetic change. The matte film softens the finish and adds a real protective layer against chips and wear, while the tint improves cabin comfort and privacy. The coating completes the system by making the exterior easier to keep clean. Because this body style has broad curves and a fastback roofline, the installation had to stay extremely consistent, particularly where the rear quarter flows into the hatch.

See our full paint protection film Los Angeles portfolio · Learn about ceramic window tint in Los Angeles · See our ceramic coating work

What we used on this BMW

STEK Dynoshield PPF — 8 mil self-healing urethane with a ceramic-infused topcoat. Matte, gloss, and colour variants available; plotter-cut from a digital pattern for the exact body panel.
STEK ceramic window film — 99% UV rejection, ~80% IR heat rejection on darker shades, no metallic layer (so phone, GPS, and cabin radar stay clean). Plotter-cut, never hand-cut on the glass.
Professional SiO₂ ceramic coating — 9H surface hardness, hydrophobic, multi-year durability when paired with our prep wash and clay-bar decontamination.

Why these finishes were combined

BMW builds with several finishes work when each layer is planned in sequence: paint protection film keeps the exterior factory-perfect against road debris and UV, while ceramic tint cuts the heat soak that California sun pushes into a closed cabin; PPF stops the impact and chemical hits, ceramic coating sits on top so washing the car takes a fraction of the time and grime does not bake in.

What to expect after the install

PPF cure window: avoid pressure-washing the wrapped panels for the first 7 days. Hand-wash only for the first 30 days. Properly cared for, the film holds its self-healing properties for 8–10 years.
Ceramic tint cure: keep the windows up for 3–5 days while the film fully dries. Small water pockets are normal during cure and disappear on their own. Lifetime warranty against fading and bubbling.
Ceramic coating maintenance: first wash at 7 days, then a regular pH-neutral wash every 2–3 weeks keeps the hydrophobic layer active for the rated lifespan.

Every BMW build at our Los Angeles studio includes a written aftercare brief and direct text-line access to the installer for the first month. Questions about your specific build — get a quote or call (424) 207-4435.

BMW X6 · Matte PPF, Tint & Coating

About this build

What we used on this BMW

Why these finishes were combined

What to expect after the install

Related Projects